Analog Devices launches its Quad-Channel Protector and Multiplexers with Programmable Fault Detection

Bangalore, India, July 17, 2015Analog Devices, Inc. has introduced a quad-channel protector and two multiplexers offering +/-55-V overvoltage protection (OVP) for precision converters, amplifiers and other components that operate from a low voltage of 4.5 V up to 36 V.  The ADG5462F quad channel protector, ADG5248F  8:1 multiplexer and ADG5249F differential 4:1 multiplexer offer +/-55-V OVP in power-on and power-off stages and provide robust, precision protection against hot-swapping and operator miss-use events, thereby protecting downstream analog components.

By providing on-chip fault diagnostics, the new devices are the first in the industry to detect and avoid defective channels, which simplifies fault detection algorithms and improves system uptime. The new products maximize design flexibility by enabling users to define fault-trigger levels independent of primary supplies. By also removing the need for multiple discrete protection components, the ADG5462F, ADG5248F and ADG5249F optimize PCB area and simplify the design process. The devices are optimized for precision instrumentation, process control and avionics applications.

The ADG5248F 8:1 multiplexer and ADG5249F differential 4:1 multiplexer maximize throughput for small signal measurement such as thermocouples or resistance temperature detectors (RTDs) by offering best-in-class, low-fault leakage of 70 nA, which is 10 times lower than competing solutions, and on-leakage of 20 nA. These levels ensure that the user can take accurate measurements when other multiplexer I/O channels are in an over-voltage fault condition. 

Key Features:

Over-voltage detection on source pins

  • Minimum secondary supply level: 4.5-V single-supply
  • Over-voltage protection up to +/−55 V
  • 4-kV HBM (human body model) ESD (ADG5462F)

VSS to VDD analog signal range

  • +/-5-V to +/-22-V dual-supply operation
  • 8-V to 44-V single-supply operation
  • Fully specified at +/-15 V, +/-20 V, +12 V, and +36 V

Operating Temperature Range −40°C to +125° 

ADG5462F: Ultra-low on-resistance of 10 ohm and on-resistance flatness of 0.5 ohm minimizes system total harmonic distortion and enhances noise performance. 

ADG5248F/49F: Ultra-low charge injection of 0.8 pC and on-capacitance of 19 pF enables higher accuracy, faster channel switching in multiplexed systems.

Family Optimized for Low RON

Product Configuration

 

Fault Trigger Threshold Fault Mode Indicator Fault Flag Packaging
ADG5462F

 

 

Quad Channel Protector Secondary Supplies Selectable  Secondary Supplies or Open Circuit Indicator of Fault 16-lead TSSOP/

LFCSP

 

ADG5412F/13F Quad SPST Primary Supplies Open Circuit Indicator of Fault 16-lead TSSOP/

LFCSP

ADG5412BF/13BF Quad SPST& Bidirectional OVP Primary Supplies Open Circuit Indicator of Fault 16-lead TSSOP/

LFCSP

ADG5404F 4:1 Multiplexer Primary Supplies Selectable

Rails or Open Circuit

Indicator of Fault & Source of Fault 14-lead TSSOP

16-lead

LFCSP

ADG5436F Dual SPDT Primary Supplies Selectable Rails or Open Circuit Indicator of Fault & Source of Fault 16-lead TSSOP/

LFCSP

 

Family Optimized for Low Charge Injection

 

Product Configuration

 

Fault Trigger Threshold Fault Mode Indicator Fault

Flag

Packaging

(Released)

ADG5248F 8:1 Multiplexer Secondary Supplies Secondary Supplies Indicator of Fault & Source of Fault 20-lead TSSOP

 

ADG5249F Differential 4:1 Multiplexer Secondary Supplies Secondary Supplies Indicator of Fault & Source of Fault 20-lead TSSOP

 

ADG5208F 8:1 Multiplexer Primary Supplies Rails None 16-lead TSSOP
ADG5209F Differential 4:1 Multiplexer Primary Supplies Rails None 16-lead TSSOP
ADG5243F

(sampling)

Triple SPDT Secondary Supplies Secondary Supplies Indicator of Fault & Source of Fault 20-lead TSSOP

 © Technuter.com News Service

Leave a Reply

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Shares
Share This